Lanner-electronic FW-7650 Manuel d'utilisateur télécharger pdf (Page 43)

The settings are : “Enabled and Disabled”.

Resource Controlled By : The Award Plug and Play BIOS has the capacity to

automatically configure all of the boot and Plug and Play compatible devices. However,

this capability means absolutely nothing unless you are using a Plug and Play operating

system such as Windows®98. If you set this field to “Manual” choose specific

resources by going into each of the sub menu that follows this field ( a sub menu is

proceded by a “►”). The settings are “Auto(ESCD)”, “Manual”.

IRQ Resources : When resources are controlled manually, assign each system

interrupt as one of the following types, depending on the type of device using the

interrupt.

IRQ3/4/5/7/9/10/11/14/15: These items specify the bus where the specified IRQ

line is used. The settings determine if AMIBIOS should remove an IRQ from the pool

of available IRQs passed to devices that are configurable by the system BIOS. The

available IRQ pool is determined by reading the ESCD NVRAM. If more IRQs must be

removed from the IRQ pool, the end user can use these settings to reserve the IRQ by

assigning an ISA/EISA setting to it. Onboard I/O is configures by AMIBIOS. All IRQs

used by onboard I/O are configured as PCI/PnP. If all IRQs are set to ISA/EISA, and

IRQ14/15 are allocated to the

onboard PCI IDE, IRQ9 will still be available for PCI and PnP devices. Settings:

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 56 57

Pas de commentaire

Lanner-electronic FW-7650 Manuel d'utilisateur Page 43